Optional indoor/outdoor DC injector with built-in lightning protection. It greatly reduces complexity of the deployment in the cases where DC source is available on the rooftop eliminating the need of weather-sealed cabinets. AUX-ODU-INJ-G is compatible with all Infinet Wireless devices.
Parameter | Description |
---|
Size and Weight | 34x94x121 mm, 0.28 kg | Connectors and Interfaces | - ETH IN - Ethernet input
- ETH OUT - Ethernet output (data+VDC, protected leg)
- PWR - DC Input
- GND - Ground clamp
| Supported Ethernet Modes | - 10/100/1000 Mbps (Gigabit Ethernet pass-through)
| Water and Dust Protection | | Operating temperature range | | DC Range | - InfiLINK XG, InfiLINK XG 1000, InfiLINK 2x2 PRO, InfiMAN 2x2 BS, Quanta 70, Quanta 5, Quanta 6, InfiLINK Evolution, InfiMAN Evolution: ±43...±56 VDC
- InfiLINK 2x2 Lite, InfiMAN 2x2 STE: +9... +56 VDC (positive voltage only)
| Using inappropriate DC source will damage the ODU, which will be not covered by warranty |
| Ethernet Connectors Pin-out | ETH IN | Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Description | Data pair A+ | Data pair A- | Data pair B+ | Data pair C- | Data pair C+ | Data pair B- | Data pair D+ | Data pair D- | ETH OUT | Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Description | Data pair A+ | Data pair A- | Data pair B+ | +VDC + Data pair C- | +VDC + Data pair C+ | Data pair B- | -VDC + Data pair D+ | -VDC + Data pair D- | Lightning Protection | In compliance with: - GR-1089
- IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
- IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
- IEC 61000-4-5 (Lightning) L5, 95A (tp = 8/20us)
- ETSI ETS 300 386
|
|
|
Packing List
AUX-ODU-INJ-G is supplied with a worm clamp TORRO 40-60/9 C7 W4 DIN 3017 - 2 pcs. The clamp is made of stainless steel A4, width 9 mm, allows the installation on a mast with a diameter of 35 to 60 mm. In case of mast diameter more than 60 mm, a similar clamps (up to a 230 mm diameter) with a width of up to 12-13 mm can be used.