High-precision MONT-KIT-85PW is supplied with device by default. It allows to make reliable and easy installation of the unit with two-axis adjustment.
Step 1: Tighten the Assembled kit and Bracer to the pole using bolt M8, washer flat M8 and washer spring M8.
Step 2: Attach the ODU and Assembled kit using bolts M5x10, M5x16, washer flat M5 and washer spring M5.
Assembled kit is already adjust. In case you require additional adjustment, perform weaken on 1/8 turn using handles. After alignment tighten screws M5x10 and M5x16. |
|
Mounting is carried out on a pole with a diameter 30 ... 85 mm. There are also possible options for mounting on a wall or pole with a diameter more than 85 mm.
|
Clamps and other optional fasteners are not included in the Mounting kit MONT-KIT-85PW. |
