Reqiered tools
Screwdriwer set.
Pliers / pipe wrench.
Wrench set.
Additional equipment
Before mounting the equipment in an outdoor environment, please make sure that:
|
Install ODU connectors facing down using the MONT-KIT-85PW. Do not tighten the fasteners to the end until the alignment is completed.
Connect the Cat5e FTP cable with a shielded connector covered by a cap to the "OUT" port of the power supply, having previously touched the power supply connector case with FTP cable connector case.
The power supply must not operate near a direct heat source, near water or in an environment with high humidity. The cables must be connected in such a way to prevent water flow to the power supply connectors. |
Connect the power cord to the power supply and then to the power circuit.
Use mains supply cords that adhere to safety regulations of the country where the equipment is getting deployed. |
Make sure a small loop (at least 10 cable diameters) is provided before the Cat5e FTP cable enter into the building.