InfiLINK Evolution is a wireless point-to-point solution with an impressive maximal performance of up to 670 Mbps, InfiMAN Evolution is a wireless point-to-multipoint solution with an impressive maximal performance of up to 800 Mbps. It operates in 5 and 6 GHz frequency ranges: from 4900 to 6425 MHz and supports the channel width 10, 20, 40, 80 MHz with exception for models E5-BSI-L and E5-BSE-L that don't support 80 MHz.

Base Stations can be used with:

• a dual polarization integrated antenna with an antenna gain 16 dBi and 21 dBi;
• an external antenna connected to two N-type ports using low-loss RF cables.

Subscriber terminals and PTP devices can be used with:

• a dual polarization integrated antenna with an antenna gain 18 dBi, 23 dBi, 25 dBi and 28 dBi;
• an external antenna connected to two N-type ports using low-loss RF cables.

and operates in LOS and non-LOS conditions. OFDM radio technology is used for data transmission.

Radio

• Automatic Modulation Control (AMC) – modulation control algorithm selects the most appropriate modulation-coding scheme in order to maximize the link performance.

• Automatic Repeat Request (ARQ) – a technology which enables packet re-transmission in case of previous unsuccessful delivery, allows to achieve reliable connectivity even in highly congested spectrum.

• Automatic Transmit Power Control (ATPC) – a technology which allows to extend the life of devices and optimize energy consumption.

• Automatic range detection - the guard interval optimal for the actual distance is automatically determined.

Networking

• MAC/IP filtering.

• RIPv2 / OSPFv2 /static routing.
  

• Tunneling (Ethernet‑over‑IP, IP‑over‑IP).
  

• L2/L3 Firewall.
  

• NAT (multipool, H.323‑aware).
  

• DHCP client/server/relay.
  

• Stacked VLAN support (Q-in-Q) avoids the limitation in the number of available VLANs (4096), which can be useful for large networks. In addition, Q-in-Q allows you to organize L2 channels within a limited VLAN list, which is widely used in provider networks and on leased communication channels.

Quality of Service

Environment

• Operating temperature range -40 ... +60 ºС, in an extended temperature range: -55 ... +60 ºС.
• Dust and water protection in compliance with IP66/IP67.
• Wind load up to 160 kph - operation, 200 kph - survival.
• Build-in lightning protection according to the standards:
  • IEC 61000-4-2: +/-4kV (contact discharge), +/-8kV (air discharge);
  • IEC 61000-4-4: +/-0.5kV
  • IEC 61000-4-5: +/-1kV (line-to-ground), +/-0.5kV (line-to-line);

Power

The device has following electrical parameters:

• Consumption is up to 20 W for base station sectors ( 30W for E5-BSQ) and up to 15 W for subscriber terminals.
• Power options: 90-240 VAC~ @ 50/60 Hz, ±43..56 VDC.
• 802.3at support or Infinet Wireless proprietary passive PoE.
• AC/DC injector:
  • IDU-CPE-G(56W) is included to the packing list of E5-BSQ model.
  • IDU-CPE-G(24W) is included to the packing list of all other models.

Compatibility with InfiLINK 2x2 / InfiMAN 2x2

Compatibility with R5000 series makes it possible to seamlessly upgrade the network and hop to Evolution families