This section describes all the supplies required to install the R5000 system components and the items included in each installation package.
Before the installation, please make sure you have all necessary parts and accessories.
Packing List
Component | Description |
---|
| - Outdoor unit (ODU)
- Integrated antenna model or connectorized model according to the Purchase Order
| | - Mounting kit
- Assembling kit for mounting the ODU on standard pole, wall or thick pipe (vertical/horizontal)
- The model depends on the ODU model
| | - Indoor power supply (IDU)
- The model depends on the ODU model
| | - Power cord
- The model depends on the region, according to the Purchase Order
|
| - Unshielded RJ-45 plug (to be used at ODU end)
- Quantity depends on the ODU model
|
| - Shielded RJ-45 plug (to be used at IDU end) - 1 pcs
|
| |
| - Cable gland
- Quantity depends on the ODU model
|
| - Clamps - 2 pcs
- Supplied with R5000-Smn(c) 5-6 GHz, 19 dBi models
|
|
|
Additional Items Required
Parts and Materials
- External antenna (only for the connectorized ODU models)
- Low-loss RF cables - CAB-RF-1M cable is recommended (only for the connectorized ODU models)
- Antenna pole (if necessary)
- Required grounding circuit, including cables and rods (if these are not already in place at the installation site).
Tools
- Screwdrivers set
- Pliers/Wrenches
- Spanners set
- Connectors isolating set:
- Raw rubber
- Thermal shrinkage tube
- Scissors
- Fan
- Mantling gun
- Additional equipment:
- GPS receiver or area map (with compass and alidade)
- Big zoom binoculars
Optional Accessories
- AUX-ODU-INJ-G DC injector with lightning protection
- AUX-ODU-LPU-G or AUX-ODU-LPU-L lightning protection unit
- AUX-ODU-SYNC synchronization unit.
Accessories are available from InfiNet Wireless. |
Precautionary Measures