Overall functionality overview

Web-interface is used for easy device management and monitoring via graphical web-based interface. Web-interface allows:

• Monitoring device interfaces statistics
• Monitoring radio link statistics
• Viewing and changing device configuration
• Access to graphical antenna alignment tool
• Running wireless link throughput tests
• Device maintenance and support
• Access to Spectrum Analyzer tool
• Viewing the system log
• DFS operation monitoring.

• For detailed information about device configuration through the web-interface please refer to the R5000 WEB GUI User Manual.

Prerequisites

In order to run and properly use the application, the following requirements must be met:

• Web-browser
• Latest WANFleX OS version installed on the device
• Web-interface support activated on the device («webcfg start» command) - enabled by default

To connect to the device via Web-browser type: http://<device IP-address> (by default: http://10.10.10.1) in your browser.

For a secure SSL-protected connection use https://<device IP-address> (by default: https://10.10.10.1) address.

Localization

Web-interface supports multiple locale sets, such as: English (default), Russian, Italian, French and Chinese.

Use the Language drop-down menu in the upper-right corner of the web-interface window to set up a locale for the current session (the default locale will remain unchanged).

To make permanent locale changes follow the instructions given in the System Settings paragraph of the Basic Settings section.