Technical User Manual

InfiMUX 6G

InfiMUX 6G product is a compact Network switch with Dual Core C2358 Intel®ATOMTM CPU and 6 GbE Network and native MINT protocol support. Fanless design with corrugated aluminum, compact form factor. InfiMUX 6G can be deployed virtually anywhere. Space-saving design offers flexibility and cost savings while maintaining the high throughput and availability required for network security, acceleration and other network applications.

About This Manual

This manual provides detailed technical information for the InfiMUX 6G devices, including system specifications, installation, commissioning, maintenance and troubleshooting.

Safety Guidelines

Follow these guidelines to ensure general safety:

• Keep the chassis area clear and dust-free during and after installation.
• Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves. 
• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
• Disconnect all power by turning off the power and unplugging the power cord before installing or removing a chassis or working near power supplies.
• Do not work alone if potentially hazardous conditions exist.
• Never assume that power is disconnected from a circuit, always check the circuit.

Lithium battery caution

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Operating Safety

Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment to acceptable operating temperatures without adequate circulation. Be sure that the room in which you choose to operate your system has adequate air circulation.
Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An open chassis permits air leaks, which may interrupt and redirect the flow of cooling air from internal components.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when electronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-prevention procedures when removing and replacing components to avoid these problems. Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is available, ground yourself by touching the metal part of the chassis.
Periodically check the resistance value of the antistatic strap, which should be between 1 and 10 megohms (Mohms).

EMC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
commercial area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense.

Important Notice