The default mounting kit packed with all the device models is MONT-KIT-85.
MONT-KIT-85 Features
- Material: casted Aluminum
- Adjustment: two axis (vertical and horizontal)
- Mounting options:
- standard pole (30-85 mm)
- wall
- thick pipe (>85 mm, horizontal/vertical) using additional fasteners (not included to the package)
- Compatible with all outdoor units produced by InfiNet Wireless
- RoHS compliant.
Figure - MONT-KIT-85 general view
MONT-KIT-85 Assembly Scheme
Figure - MONT-KIT-85 Assembly Scheme
MONT-KIT-85 BOM list is bellow
PN | Item | Q-ty |
---|---|---|
1 | Basement | 1 |
2 | Bracket | 1 |
3 | Bracer | 1 |
4 | Lever | 1 |
5 | Bolt M6x14 | 4 |
6 | Bolt M8x35 | 2 |
7 | Bolt M8x80 | 2 |
8 | Nut M8 | 2 |
9 | Washer flat M6 | 4 |
10 | Washer flat M8 | 4 |
11 | Washer spring M6 | 4 |
12 | Washer spring M8 | 4 |
Table - MONT-KIT-85 BOM list
MONT-KIT-85 Installation procedure
- Attach the Basement (PN1) to the back of the device, using Items with PNs 5, 9, 11
- Tighten the Bracket (PN2) and the Bracer (PN3) to the pole, using Items with PNs 7, 10, 12
- Attach the Lever (PN4) between the Bracket (PN2) and the Basement (PN1), using Items with PNs 6, 8, 10, 12. Do not fasten the nuts!
- Adjust the required tilt and fasten all nuts at the required position.
NOTE
Tighten the nut until the washer spring click, without pulling.