...

• Status - device operation parameters.
• Maintenance - management tools: firmware, configurations etc.
• CLI - device management via command line interface.

The "Status" section consists of several parts:

...

There is special section includes both the current and remote device. This section presents characteristics of wireless link in downstream and upstream. For local and remote devices, there is the ability to switch to its web interface or to manage via the command line.

Network infrastructure requirements

...

Configuration

The configuration is automatically loaded for each device added to InfiMONITOR NEXT. If the device's configuration has been changed, it will be reloaded, but the previous configuration won't be deleted. Thus, the monitoring system always stores both the current device configuration and its previous versions.

...

Upload firmware files

To update the softwarefirmware, it must be previously uploaded into a special storage of the monitoring system.  In In order to do this, go to the "Management" section and click the "SoftwareFirmware" button.

Each file in the repository has the following fields:

• Version - the software firmware version.
• Platform - the hardware platform for which the software firmware is intended. The monitoring system will allow to create an update task using only those files that are suitable for the device selected.
• Type - the software firmware type, MINT or TDMA.
• Source - firmware files can be uploaded to the repository either manually or automatically from the update center (not available at the moment). Here will be displayed the source of the file.
• Build date - date when the software firmware file was built.
• Comment - the monitoring system administrators can leave comments to each file.

Center
Scroll Title title Figure - software firmware files list

...

Firmware update

The software firmware update is performed via a special update job.  In In order to do this, go to the "Maintenance" section of the device card. In the "Firmware" line click the "Manage" button.  This This will open a list of software firmware files suitable for this device.

Select the software firmware version to be applied to the device, then click the "Create job" button. Same to the configuration update jobs, you can run the update immediately or schedule it for a later time.

Command execution

The monitoring system allows to manage the device using the command line. The command line is available in the "CLI" subsection of the device status section.

To manage the device from the monitoring system, it must be provisioned, see System configuration - Provisioning.

A complete list of commands is available in the technical documentation:

• For InfiLINK 2x2, InfiMAN 2x2, InfiLINK Evolution, InfiMAN Evolution - WANFleX - Technical User Manual
• For InfiLINK XG, InfiLINK XG 1000 - InfiLINK XG / InfiLINK XG 1000 - CLI Commands - Technical User Manual