The external synchronization unit allows to synchronize the time (the beginning of each second) across multiple devices (up to 7) with an accuracy less than a microsecond, so all the connected units can enable transmitters at the same time. This entirely eliminates mutual interference of the neighboring sectors, when one transmitting unit with its power signal interferes to the neighbor unit to receive weak signal of its customers.
...
| Center |
|---|
| Scroll Title |
|---|
| title | Table - Synchronization mode information |
|---|
| | Parameter | Description |
|---|
| Status | Current device status | | Total enabled | Total time during which the synchronizaion unit was enabled | | Total valid | Total time during which the timing accuracy was better than 10 microseconds | | Valid time | Time during which the timing accuracy was better than 10 microseconds | | Last message | Last message from synchronization software |
|
|
Additionally in order to determine the device coordinates GNSS position can be enabled:
...
| Center |
|---|
| Scroll Title |
|---|
| title | Table - GNSS statistic description |
|---|
| | Параметр | Описание |
|---|
| Total GPS time | Total time of GPS operation | | Total nonvalid time | Total time during which the information about coordinates was unavailable | | Number of losses | Quantity of cases when the information about coordinates had become unavailable | | Now coordinates are valid last ... | Time of GPS operation since last coordinates discovering | | Sattelites histogram | Histogram of visible satellites quantity | | SATmin | Minimum of visible satellites (since the last time you cleared the statistic) | | SATmax | Maximum of visible satellites (since the last time you cleared the statistic) |
|
|