...

• Device - the device name.
• Status - current device status.
• Family - family to which this device belongs.
• Serial number - unique serial number assigned to device at the production stage.
• Groups - list of groups the device belongs to.
• IP address - device's IP addresses list.

To apply a device filter, use the "Add filter" button at the top of the list and set the search parameters. The "IP-address" filter allows to search both a single address and a range of addresses (no more than 255).

Device profile

Each device is presented by its profile contains the whole information about device. There are following section in profile:

...

Select the firmware version to be applied to the device, then click the "Create job" button. Same to the configuration update jobs, you can run the update immediately or schedule it for a later time.

Devices groups

The devices can be joined in groups. Grouping is necessary to manage visibility areas and perform group operations such as software updates. Each device must be added to at least one group.

By default, InfiMONITOR NEXT has the following groups:

• Default group - first group necessary to start using InfiMONITOR NEXT.
• Group for automatically discovered devices - a special group where automatically added devices are placed.

To manage groups in "Device Management" section, go to the "Device Groups" subsection.
This section provides a list of all groups created in the monitoring system, to create a new group, click the "Add Group" button on the sidebar. To view devices of a particular group, select the group and click the "Show devices in group" button on the sidebar.

Command execution

The monitoring system allows to manage the device using the command line. The command line is available in the "CLI" subsection of the device status section.

...