...
This page is intended to show the Quanta 5 web interface options , that provide a wide range of monitoring capabilities. This article is only intended to briefly show briefly the main paremeters parameters for device monitoring and troubleshooting, for . For more information about the Web interface please proceed to Quanta 5.
...
The Dashboard displays a read-only summary of the current link status information, local and remote device signal strength, capacity for downlink and uplink, current values of the basic configuration settings and the Ethernet network status.
| Center |
|---|
|
The wired interface state monitoring is also available in this section. The Quanta 5 device has one wired gigabit ethernet Ethernet interface, its status and current load can be viewed in the real time.
| Center |
|---|
|
Modulation
...
and coding scheme
For the Quanta 5 device, modulation the modulation and coding schemes are selected independently for each channel (uplink and downlink) for both polarizations. Quanta 5 supports 14 modulation-coding schemes from QPSK 1/4 to QAM256 7/8. Current The current modulation for each channel is displayed in the MCS subsection.
...
- -90...-80 dBm - close to the receiver sensitivity level, only the lowest modulations are available.
- -80...-60 dBm - average input range.
- -60...-40 dBm - the recommended range for achieving the best performance.
- >-40 dBm - the input signal level is too high.
...
The CINR indicator shows the signal quality, more precisely, how strong is the carrier signal compared to the noise plus interference level. Available values:
- 5...12 dB - very low signal quality, only the lowest modulations are available.
- 13...19 dB - low signal quality, average modulations are available.
- 20...27 dB - average signal quality.
- >=28 dB - very good signal quality signal , suitable for the highest modulations.
| Center |
|---|
|
...
Retried and lost packets need also to be tracked. Retries should tend to zero , and a link with the a retries value more than 5% should not be allowed to operationoperate.
| Center |
|---|
|
System log
An important tool in troubleshooting, which allows to track changes that preceded the link degradation. To view the system log, go to "Service" → "Maintenance" → "Device information" and click the "Show log" button.
...
Quanta 5 management options are available in the "Maintenance" section, which allows to perform firmware updates, operations with licenses and with the configuration, as well as device reboot and reset to factory settings.
License
License The license contains information about the allowed frequencies, the channel width and the power limit. This section allows to view the current license and upload a new one. To upload a license on the device, click on the "Upload license" button and drag and drop a file from your file manager into the dotted area.
...
There are two options to upgrade the firmware on the device:
- Manually - the new firmware should be downloaded from the official Infinet FTP server: ftp://ftp.infinet.ru/pub/Firmware/. Click on the "Upload firmware" button and choose a firmware file. Or Alternatively, you can drag and drop a file from your file manager into the dotted area.
- Automatically (coming soon) - firmware may be upgraded to the latest firmware version can be uploaded automatically. Click on "Update firmware to the latest version", after that your web browser will try to download the latest firmware version and upload it to the unit. Firmware The firmware will be applied effective after unit reboot.
| Center |
|---|
|
Configuration
The Quanta 5 device allows to upload, download and view the current configuration in text form. To view the configuration, click on the "Show current configuration" button , and the file will open in a new window. To download the configuration, click on the "Download current configuration" button , and the configuration can be loaded by clicking on the "Upload configuration" button, or you can drag and drop a file from your file manager into the dotted area.
| Center |
|---|
|
Diagnostic card
In situation then helps of situations when the help of the InfiNet Wireless technical support team is requieredrequired, the diagnostic card is a necessary tool which helps to detect and solve an issue faster and more effective. Click on the "Download" button to create the diagnostic card.
| Center |
|---|
|
