Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Figure - AUX-ODU-LPU-L |
---|
|
Gliffy Diagram |
---|
name | AUX-ODU-LPU-L Overview |
---|
pagePin | 4 |
---|
|
|
AUX-ODU-LPU-L is a bidirectional external outdoor external outdoor lightning protection unit for unit for Infinet Wireless systems designed systems designed to withstand the toughest conditions toughest conditions and protect the outdoor unit outdoor unit or the 3rd party networking equipment networking equipment installed indoors from sudden from sudden power surges induced by lightning by lightning strikes. Despite the fact every fact every Infinet wireless device has a builta built-in lightning protection. AUXAUX-ODU-LPU-L, thanks to its superior its superior GR-1089-grade protection, greatly greatly reduces the risk of damage for damage for the systems operating in harsh environments harsh environments or difficult-to-reach locationsreach locations. AUXAUX-ODU-LPU-L is compatible with all Infinet Wireless devices.
...
Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Table - AUX-ODU-LPU-L Specification |
---|
| Parameter | Description |
---|
Size and Weight | | Connectors and Interfaces | - 2 x Ethernet ports
- Ground clamp
| Supported Ethernet Modes | - 10/100/1000 Mbps (Gigabit Ethernet pass-through)
| Water and Dust Protection | | Operating temperature range | | Ethernet pinout | Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Data pair | A+ | A- | B+ | C- | C+ | B- | D+ | D- | Lightning Protection | In compliance with: - GR-1089
- IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
- IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
- IEC 61000-4-5 (Lightning) L5, 95A (tp = 8/20us)
- ETSI ETS 300 386
|
|
|
Packing list
...
Scroll Title |
---|
title-alignment | center |
---|
title | Figure - Packing list AUX-ODU-LPU-L |
---|
|
Gliffy Diagram |
---|
name | AUX-ODU-LPU-L Packing list |
---|
pagePin | 4 |
---|
|
|
AUX-ODU-LPU-L is supplied with a worm clamp TORRO 40-60/9 C7 W4 DIN 3017. The clamp is made of stainless steel A4, width 9 mm, allows the installation on a mast with a diameter of 35 to 60 mm. In case of mast diameter more than 60 mm, a similar clamp (up to a 230 mm diameter) with a width of up to 12-13 mm can be used.