...
SVI interface is a virtual L3 interface. Can be assigned to a switch group to provide the device management using this switch group. Each unit supports 4095 5000 virtual "sviN" switch interfaces (in range 0...40954999).
An SVI interface has the following characteristics:
...
Center |
---|
Parameter | Description |
---|
N | Identifier of the SVI interface to configure.
| group G | Assigns specified SVI interface to the switch group. - "G" – switch group identifier.
| [addpri|setpri N|-1] | Allows to provide priority management. - "setpri N" – sets the packet priority with the value "N".
- "-1" – resets the priority.
- "addpri" – changes the priority only if new is higher than already available for the package. Thus, the "addpri" parameter allows only to increase the priority.
| clear
| Removes SVI interface settings. |
|
Examples
Set the priority 5 for all the packets passing through the "svi1" interface. |
Assign "svi100" interface to switch group # 100.
Code Block |
---|
| svi 100 group 100 |
|