...

Adding network hosts

InfiMONITOR NEXT provides automatic, continuous device discovery. The connections of the devices already added to the monitoring system are continuously investigated.  ThusThus, for monitoring the subscribers of the base station sector, it is enough to add only the sector itself.  When When a new subscriber is connected to the sector, it will be detected and added automatically, in case there is the network connectivity between a monitoring system and a discovered device. You can manage the function in System configuration section.

There is also the possibility to add devices to the monitoring system manually.  In In this case, the devices can be immediately added to the desired device group, while an automatically detected device will be added to the "Auto-Discovered Devices" groupspecial group for auto-discovered devices, which is defind in Installation wizard.

...

To add network hosts, go to the "Management" section. This section provides a list of all the devices and groups added previously. The following parameters are displayed:

• "Host" - the device's name.
• "Status" - current device status.
• "Family" - the product family of this device model.
• "IP address" - device IP address list.

...

Then go to the "Device Groups" section and select the group to which the devices added in this job should be placed.  Devices Devices not covered by the job, but discovered through this process will be placed to the "Auto-Discovered Devices" Groupspecial group for auto-discovered devices.

To start the task, click on the "Save" button.

...

Device adding procedure

A network node is not added immediately, but only after polling. The procedure is implemented in the following way:

...

Link addition 

Anchor
Добавление каналов связи Добавление каналов связи

InfiMONITOR NEXT automatically detects the wireless links between network nodes, there is no need to add them manually. 

Devices groups

The devices can be joined in groups. Grouping is necessary to manage visibility areas and perform group operations such as software updates. Each device must be added to at least one group.

...