...

• "Sender address" - an email address that will be set in the FROM field of emails sent to users by the monitoring system.
• "SMTP server address" - FQDN or IP address of the SMTP server.
• "SMTP server network port" - the network port used to connect to the SMTP server.
• "Use SSL" - this option must be enabled if the connection to the SMTP server is performed using the SSL protocol. In case the connection has no encryption or the TLS protocol is used, the parameter must be disabled - the monitoring system automatically determines the possibility of the TLS protocol using.
• "SMTP server login" - username for authentication on the SMTP server. Leave blank if no authentication is required.
• "SMTP server password" - password for authentication on the SMTP server. Leave blank if no authentication is required.

...

The polling of network devices is carried out via SNMP protocol. The monitoring system uses the list of SNMP credentials, which is managed in the "Settings" section. In the SNMP part of this section, the following data should be specified:

...

Center
Scroll Title title Figure - SNMP access credentials

Auto

...

discovering

Auto - discovering mode is enabled by default in InfiMONITOR NEXT. You can configure it the "Other" part of the "Settings" section, there are the following options available:

...