...
| Center |
|---|
| Scroll Title |
|---|
| title | Table - Settings for MIMO mode |
|---|
| | Channel Type | Dual |
|---|
| Radio Chain | #0 | #1 |
|---|
| Rx | | Background Color |
|---|
Activated |
| | Background Color |
|---|
Activated |
|
|---|
| Tx | | Background Color |
|---|
Activated |
| | Background Color |
|---|
Activated |
|
|---|
|
|
Settings for "MISO" mode
The same data streams are transmitted over "Chain #0" and "Chain #1", lowering the performance of the link, but enhancing the ability to transmit data in case of interference or obstacles in transmission path (a special mode of operation of MIMO devices used in NLOS conditions or in a noisy RF environment):
| Center |
|---|
| Scroll Title |
|---|
| title | Table - Settings for MISO mode |
|---|
| | Channel Type | Single |
|---|
| Radio Chain | #0 | #1 |
|---|
| Rx | | Background Color |
|---|
Activated |
| | Background Color |
|---|
Activated |
|
|---|
| Tx | | Background Color |
|---|
Activated |
| |
|---|
|
|
Settings for "SISO" mode
The data streams are transmitted over Chain #0 (corresponding to vertical polarization) only, lowering the performance of the link, but increasing the link distance (transmitter operates with one antenna as does the receiver; there is no diversity and no additional processing for recomposing the Rx signal):
| Center |
|---|
| Scroll Title |
|---|
| title | Table - Settings for SISO mode |
|---|
| | Channel Type | Single |
|---|
| Radio Chain | #0 | #1 |
|---|
| Rx | | Background Color |
|---|
Activated |
| | Background Color |
|---|
| Deactivated |
|
|---|
| Tx | | Background Color |
|---|
Activated |
| | Background Color |
|---|
| Deactivated |
|
|---|
|
|
The picture below summarizes the link establishment between two units that are configured in different operational modes. As it can be noticed, only the combination MIMO – SISO is not functional.
...