...
| Center |
|---|
| Scroll Title |
|---|
| title | Figure - Network Settings default interfaces |
|---|
|  Image Modified
|
|
| Center |
|---|
| Scroll Title |
|---|
| title | Table - Network Settings |
|---|
| | Interface type | Operations |
|---|
| ethX | - Configure the IP address(es) and the mask of the interface
- The IP address(es) of the "ethX" interface is accessible via Ethernet LAN segment only (it won't be accessible via the "rfX" interface from other neighbor unit)
- The IP address(es) of the "ethX" interface is used in the routing process
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
- Set the interface mode (for example: 1000BaseTX-fullduplex) - the default value is “Auto” (recommended)
- Activate/deactivate PoE: this option is available only for eth1 interface of the units with two Fast Ethernet ports; it is used to ease the CCTV setup or to power up another InfiNet Wireless unit (except Omx, Mmx, Um and Xm) - by default, it is deactivated
| | rfX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
| | sviX | - SVI interface is a logical L3 interface of the switch (solely used for the management of the unit)
- Configure the IP address(es) and the mask of the interface (as the management IP address(es) of the unit)
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically (as the management IP address(es) of the unit)
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the Switch group number which this interface is assigned to (bind the SVI interface to a switch group)
| | prfX | - PRF interface makes the Ethernet interface that it is assigned to, to appear as a regular RF interface in terms of the MINT network (for more information please refer to the WANFleX OS User Manual)
- Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be transmitted the encapsulated packets (assign the PRF interface to the physical Ethernet interface)
- Set the channel number (from 0 to 3) on which the frames are sent and received by the parent interface
- Both PRF interfaces (of the two units in the link) must have the same channel assigned in order to establish the wireless link
| | vlanX | - Configure the IP address(es) and the mask of the interface in case you use this interface for the management of the unit, only
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be transmitted the encapsulated packets
- Configure the VLAN tag (or VLAN ID) for the current interface (from 1 to 4094)
- Enable/disable Q in Q
| | lagX | - Link aggregation interface is a logical interface used to combine multiple physical channels into one logical channel in order to increase link capacity and redundancy (for the units with two physical Ethernet ports)
- Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be aggregated the encapsulated packets
- Enable/disable Fast Mode
| | tunX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the tunneling mode: IPIP or GRE
| | tapX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
|
|
|
Click the «Create Pseudo-RF», «Create VLAN», «Create LAG» and «Create SVI» buttons in order to create the corresponding interfaces in the unit configuration.
...