| Switch Rules parameter | Description |
|---|
| Action | - Set the action for the packets that match this rule: permit/deny
|
| QM Channel | - Allocate a logical channel if there are logical channels prior created in the "Traffic Shaping" section
- If you allocate a number for a logical channel that was not prior created in the "Traffic Shaping" section, it has no effect in the rule configuration
- For the indications how to create a logical channel, please refer to the "Traffic Shaping" section below
|
| Priority | - Allocate the priority for all the packets going through the new rule of the filter:
- “Up to” is used to increase the packet priority to the specified value only if the processed packet has a lower priority
- “Set” is used to assign a new priority regardless of the value already assigned to the packet
|
| Packet capture filter | - Set the packet capture filter for Switching
- The syntax is called “PCAP expression”
- Please refer to filter expression syntax description above
- Validate rule by clicking the «Validate» button
|
| VLAN list | - Set the VLAN ID
- It is available for the legacy configuration
- It can be set also in “PCAP expression” "PCAP expression" option (for example: VLAN 100 when “PCAP expression” is chosen), PCAP expressions cannot be used in "trunk/in-trunk mode"
- Validate rule by clicking the «Validate» button
|