Wireless device
An integrated wireless device contains The wireless device contains both the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment this equipment can be used to create point-to-point wireless links at distances in excess of 5 20 km (depending on weather conditions, interference, terrain, climate zones, etc.). The following lens-type integrated antenna with an antenna gain 39 dBi is available.
...
wireless device is supplied in the following configuration:
- Lens antenna with 39 dBi gain.
- Cassegrain antenna with 50 dBi gain.
Lens antenna
Center |
---|
Gliffy Diagram |
---|
displayName | Q70_equipment |
---|
name | Q70_покраскаequipment |
---|
pagePin | 4 |
---|
|
|
Cassegrain antenna
Center |
---|
Gliffy Diagram |
---|
| |
---|
name | Q70-50 Hardware |
---|
pagePin | 1 |
---|
|
|
Grounding bolt
For grounding the ODU wireless device to the supporting structure.
...
Interfaces
Quanta 70 has network combo port:
...
gigabit Ethernet and SFP. Only one port can be used for data transmission at a time.
Note |
---|
|
Please note, the SFP port has priority in case both ports are enabled. |
Center |
---|
Interface | Description |
---|
Gigabit Ethernet | RJ45 socket for connecting to power supply and |
---|
|
...
data transmission. The network connection to the |
|
...
wireless device is made via a 1000BaseT (Gigabit) Ethernet connection. Power is provided to the |
|
...
device over the 1000BaseT Ethernet connection |
|
...
using a standard IEEE 802.3at passive PoE power supply. | SFP |
---|
|
...
| External optical Gigabit port for plugging of the optical SFP transceiver module. |
---|
|
LEDs
Note |
---|
|
Only one port can be used for data transmission at a time. Please note, the SFP port has priority in case both ports are enabled. |
...
RSSI value indication in dBm. In case the wireless link is not established there are will be no values.
Power and wired statuses indication
Power and wired statuses indication is performed via glassy plug of the cable gland. |
...
Initialization stage
Center |
---|
| Ports | Condition | Indication
---|
Center |
---|
LED | State | Status | Description |
---|
RSSI | Number | RX Signal value | Values on the RSSI LED are displayed in negative (-) dBm. For example, 90 represents a received signal level of -90 dBm. Lower values indicate stronger received signal levels. |
---|
— — | Wireless link is not established | Gigabit Ethernet SFP |
---|
Power On (initialization)At | Flash | Initialization | The LEDs on both ports light up with white on second. Then LEDs check is performed: red, blue, green are lightened up sequentially. |
---|
| Flash | Loading | Only for Gigabit Ethernet port: at the beginning green is lightened a few seconds, on the second loading stage switches to blue. | ON/Blue | Power | Only for Gigabit Ethernet port. | ON/Red | Speed 10 Mbps | Only for Gigabit Ethernet port. | ERP | ON/Yellow | Speed 100 Mbps | Only for Gigabit Ethernet port. | ON/Green | Speed 1000 Mbps |
| ON/Green | ERConsole stage | Port | (Gigabit Ethernet or SFP) with the established link lights up with green, the second port remains blue. |
|
Working stage
Center |
---|
Gliffy Diagram |
---|
namedisplayName | Ethernet Indication |
---|
| gliffy | name | SFP Ethernet Indication |
---|
|
|
...
Part number description
Quanta 70 part number has the following structure
...
Structure items are described below
Center |
---|
|
Item | Description |
---|
1 | Product family name: |
---|
2 | Frequency range: |
---|
3 | 39 - antenna gain, dBi.
...
Lightning protection unit
...
Part number description
Include Page |
---|
| _Quanta 70 Numbering convention |
---|
| _Quanta 70 Numbering convention |
---|
|