...
The wireless device contains both the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment this equipment can be used to create point-to-point wireless links at distances in excess of 5 20 km (depending on weather conditions, interference, terrain, climate zones, etc.). The wireless device is supplied in the following the following configuration: integrated lens
...
- 39 dBi gain.
- Cassegrain antenna with 50 dBi gain.
Lens antenna
| Center |
|---|
| Gliffy Diagram |
|---|
| displayName | Q70_equipment |
|---|
| name | Q70_покраскаequipment |
|---|
| pagePin | 4 |
|---|
|
|
Cassegrain antenna
| Center |
|---|
| Gliffy Diagram |
|---|
| |
|---|
| name | Q70-50 Hardware |
|---|
| pagePin | 1 |
|---|
|
|
Grounding bolt
For grounding the ODU wireless device to the supporting structure.
...
| Center |
|---|
| Interface | Description |
|---|
| Gigabit Ethernet | RJ45 socket for connecting to power supply and network via the PoE power supplydata transmission. The network connection to the wireless device is made via a 1000BaseT (Gigabit) Ethernet connection. Power is provided to the device over the 1000BaseT Ethernet connection using a standard IEEE 802.3at passive PoE power supply. |
|---|
| SFP | External optical Gigabit port for plugging of the optical SFP transceiver module. |
|---|
|
LEDs
| Note |
|---|
|
Power and wired statuses indication is performed via glassy plug of the cable gland. |
| Center |
|---|
| LED | State | Status | Description |
|---|
| RSSI |
|---|
level | Number | RX Signal value | Values on the RSSI LED are displayed in negative (-) dBm. For example, 90 represents a received signal level of -90 dBm. Lower values indicate stronger received signal levels. |
|---|
| — — |
The wireless | Wireless link is not established |
|
RSSI level Indicator
...
Power and wired statuses indication
Power and wired statuses indication is performed via glassy plug of the cable gland.
Initialization stage
| Center |
|---|
| Ports | Condition | IndicationPower On (initialization)| Flash | Initialization | The LEDs on both ports light up with white on second. Then LEDs check is performed: red, blue, green are lightened up sequentially. |
| At | Flash | Loading | Only for Gigabit Ethernet port: at the beginning green is lightened a few seconds, on the second loading stage switches to blue. | | ON/Blue | Power | Only for Gigabit Ethernet port. | | ON/Red | Speed 10 Mbps | Only for Gigabit Ethernet port. | | ON/Yellow | Speed 100 Mbps | Only for Gigabit Ethernet port. | | ON/Green | Speed 1000 Mbps |
| | ON/Green | ERConsole stage | Port |
(Gigabit Ethernet or SFP) | with the established link lights up with green, the second port remains blue. |
|
Working stage
| Center |
|---|
| Gliffy Diagram |
|---|
| namedisplayName | Ethernet Indication |
|---|
|
|
...
Part number description
Quanta 70 part number has the following structure
...
Structure items are described below
| Center |
|---|
|
| Item | Description |
|---|
| 1 | Product family name: |
|---|
| 2 | Frequency range: |
|---|
3 | 39 - antenna gain, dBi.
...
Lightning protection unit
...
| Ethernet Indication | | pagePin | 7 |
|---|
|
|
Part number description
| Include Page |
|---|
| _Quanta 70 Numbering convention |
|---|
| _Quanta 70 Numbering convention |
|---|
|