Include Page | ||||
---|---|---|---|---|
|
Hide_comments |
---|
Cable Gland Assembly for RJ-45 connector
...
- Step 2: Assemble cable gland nut, the split sealing grommet and the cable gland threaded coupling onto the pre-terminated cable as shown on the figure below.
- Step 3: Insert the split sealing grommet into the cable gland threaded coupling.
- Step 4: Insert the RJ-45 connector into the device socket until you hear a click.
- Step 5: Screw the cable gland threaded coupling into the port and tighten it. Do not apply excessive force.
- Step 6: Tighten the cable gland nut (4). Do not apply excessive force.
...
Assemble procedure
- Step 1: Put Put the cable gland nut, the split sealing grommet and cable gland threaded coupling onto the pre-terminated optical cablegland threaded coupling onto the optical cable as shown on the figure below.
- Step 2: Insert the split sealing grommet into the cable gland threaded coupling.
- Step 3: Set the SFP - module into the socket until you hear a click.
- Step 4: Insert the optical connector into the SFP - module.
- Step 5: Screw the cable gland threaded coupling into the port and tighten it.
- Step 6: Tighten the cable gland nut. Do not apply excessive force.
Note | ||
---|---|---|
| ||
In order to disassemble SFP, please disconnect the optical cable, pull the clip of the SFP - module and withdraw the SFP - module from the slot. |
Note | ||
---|---|---|
| ||
SFP module is not included into the packing list. |
Center | ||||||||
---|---|---|---|---|---|---|---|---|
|