...
Assemble procedure
- Step 1: Put Put the cable gland nut, the split sealing grommet and cable gland threaded coupling onto the pre-terminated gland threaded coupling onto the optical cable as shown on the figure below.
- Step 2: Insert the split sealing grommet into the cable gland threaded coupling.
- Step 3: Set the SFP module into the socket until you hear a click.
- Step 4: Insert the optical connector into the SFP module.
- Step 5: Screw the cable gland threaded coupling into the port and tighten it.
- Step 6: Tighten the cable gland nut. Do not apply excessive force.
...
| Note | ||
|---|---|---|
| ||
SFP module is not included into the packing list. |
| Center | ||||||||
|---|---|---|---|---|---|---|---|---|
|