Include Page | ||||
---|---|---|---|---|
|
Hide_comments |
---|
The packets received on through the wired interface can be marked with a specific 802.1p priority.
Example - configuring 802Set 5 priority according to 802.1p priority "5" for the traffic received on VLAN 100 at "ge0".
The 802.1p priority assignment takes place only for the incoming packets with 802.1Q tags (VLAN tags) at the wired interfaces.
- In
...
- the section "Switch" configure Connectivity Matrix.
- In the section "Switch" → "VLAN-based Switching" enable VLAN-based Switching.
- Click the “Add VLAN” button, "VLAN 2" is added by default.
- Modify the value for the VLAN tag according to the actual requirements
...
Center | |||||
---|---|---|---|---|---|
|
...
- .
...
“on” - allows the VLAN to pass through that port
“off” - does not allow the VLAN to pass
“native” - allows the VLAN to pass, but allows also the untagged traffic to pass through that port.
...
- Select VLAN mode.
- Set the priority for the selected VLAN.
- In the section "Radio" → "Radio Setting" enable "Traffic Prioritization".
Center | |||||||
---|---|---|---|---|---|---|---|
|
Center | |||||
---|---|---|---|---|---|
|