High-precision MONT-KIT-85PW is supplied with device by default.
It allows to make reliable and easy installation of the unit with two-axis adjustment. Assemble the Mounting kit according to the scheme below. The nut must be tightened until the spring washer clicks, without over-tightening Packing List
Assemble Procedure
Step 1: Tighten the Assemble kit and Bracer to the pole using bolt M8, washer flat M8 and washer spring M8.
- Bolt M8x50 - used for installation on pole with Ø 30 ... Ø 55 mm.
- Bolt M8x80 - used for installation on pole with Ø 55 ... Ø 85 mm.
Step 2: Attach the ODU and Assemble kit using screws M5x10, M5x16, washer flat M5 and washer spring M5.
| Note |
|---|
|
Assemble kit is already adjust. In case you require additional adjustment, perform weaken on 1/8 turn using handles. After alignment tighten screws M5x10 and M5x16. |
...