...
Packing List
- Assembled kit (x1).
- Bracer (x1).
- Bolt M5x10 (x1).
- Washer flat M5 (x1).
- Washer spring M5 (x1).
- Bolt M8x50 (x2).
- Bolt M8x80 (x2).
- Washer flat M8 (x2).
- Washer spring M8 (x2).
Assemble Procedure
Step 1: Tighten the Assembled kit and Bracer to the pole using bolt M8, washer flat M8 and washer spring M8.
...
Step 2: Insert and tighten the Assembled kit on the back side of the device using bolts M5x10, M5x16, washers flat M5 and washers spring M5.
Step 3: Assembled kit is already have factory adjustment. In case you require additional alignment perform it using adjustment knobs, after that Perform required antenna alignment using adjustment knobs and then tighten nuts M8.
| Note | ||
|---|---|---|
| ||
M8 nuts are pre-tightened at the manufacturing facility in a position that allows the device to be adjusted using the adjustment knobs and ensures that the wireless device does not shift during the final nuts tighten. |
| Note | ||
|---|---|---|
| ||
If further adjustment is required, weaken the nuts M8 on about 15 degrees. Perform required antenna alignment using adjustment knobs and then tighten nuts M8. Do not adjust the knobs without weaken the nuts first. |
...