High precision mounting kit MONT-KIT-85PW is supplied with device by default.
It allows to make reliable and easy installation of the unit with two-axis adjustment. Packing List
| Center |
|---|
| Gliffy Diagram |
|---|
| |
|---|
| name | MONT-KIT-85PW Packing List |
|---|
|
|
Assemble Procedure
Step 1: Tighten the Assembled kit and Bracer to the pole using bolt M8, washer flat M8 and washer spring M8.
- Bolt M8x50 - used for installation on a pole with Ø 30 ... Ø 55 mm.
- Bolt M8x80 - used for installation on a pole with Ø 55 ... Ø 85 mm.
Step 2: Insert and tighten the Assembled kit on the back side of the device using bolts M5x10, M5x16, washers flat M5 and washers spring M5.
Step 3: Perform required antenna alignment using adjustment knobs and then tighten nuts M8.
| Note |
|---|
|
M8 nuts are pre-tightened at the manufacturing facility in a position that allows the device to be adjusted using the adjustment knobs and ensures that the wireless device does not shift during the final nuts tighten. |
| Note |
|---|
|
If further adjustment is required, weaken the nuts M8 on about 15 degrees. Do not adjust the knobs without weaken the nuts first. |
Mounting is carried out on a pole with a diameter 30 ... 85 mm. There are also possible options for mounting on a wall or pole with a diameter more than 85 mm.
| Note |
|---|
|
Clamps and other optional fasteners are not included in the mounting kit MONT-KIT-85PW. |