...
The subsystem is designed to create and manage incidents based on the rules set by theInfiMONITOR NEXT administrator users.
The incident management subsystem's operation begins after the polling results received through the polling subsystem. This subsystem verifies the match between the rules set and the received values. If the condition specified in a rule is met, an incident is created. The incident management subsystem performs maintenance of each active incident.
...
- Provisioning - automatically enables remote access from for monitoring system to devices via SSH, that is required for configuration management functions.
- Configuration update - safely applies configuration changes made by monitoring system users. This function is available only for provisioned devices.
- Firmware update - uploads and applies the specified firmware version.
...
The monitoring system applies configuration changes made by users. The main advantage of this feature is protection against logical errors in configuration, that may cause connection loss. If applied changes lead to a loss of connection between device and InfiMONITOR NEXT, then the previous configuration version will be restored.
...
- The monitoring system connects to device and uploads the new configuration, but not applies it.
- The new uploaded configuration is set as prospective, the current is set as main one.
- The device is being rebooted.
- The device will be booted with the new configuration and delayed reboot is armedset. If delayed reboot is done then the device will be rebooted with its previous configuration.
- The monitoring system compares active current device configuration with configuration that should have been applied.
- If both of configurations are equal then delayed reboot will be cancelled. New configuration is applied successfully.
- If configurations are differ or monitoring system lost connection to wireless device, then the delayed reboot timer will trigger and the previous configuration will be restored.
...
Web GUI
| Anchor | ||||
|---|---|---|---|---|
|
For the NEXT monitoring system management, a A graphical web interface is used for InfiMONITOR NEXT monitoring system management. The Web GUI interacts with all the subsystems.
...
- Google Chrome;
- Firefox;
- Microsoft Edge;
- Safari.
The recommended minimum screen resolution is 1600×900.
...
The subsystem provides data storage and quick access to the information for the web GUI and subsequently for the engineers operating InfiMONTOR NEXT.
Hide_comments
Licensing
The license permits using InfiMONITOR NEXT. There are three license types, differ in the validity period and the maximum number of devices for which monitoring will be performed. One license may be installed to only the one monitoring system instance.
| License type | Device number | Validity period | Description |
|---|---|---|---|
| Free | 30 | unlimited | Free license for full-featured use of InfiMONITOR NEXT for small wireless networks. |
| Trial | unlimited | 1 month | A temporary license for the evaluation use of monitoring system. |
| Enterprise | defined at ordering | defined at ordering | License for full-featured use of monitoring system for wireless networks of any size. |
All added to InfiMONITOR NEXT devices are divided into the following categories:
- Licensed device - license permits are granted to such devices, so monitoring/management functions will be available. Each licensed device decrease by one the total allowed number of devices, set by the license.
- Unlicensed device - a device for which no license permits are granted. Unlicensed devices appears when the number of added devices exceed the total allowed number of devices set by the license.
| Note |
|---|
In fact InfiMONITOR NEXT performs monitoring of any devices, whether licensed or unlicensed. However, users are provided with monitoring data and management function only for licensed devices. If license limitations on device number will be extended unlicensed devices become licensed and monitoring data for the past period will be available. |
If the maximum device number permitted by license is less than number of being added devices, licenses will be assigned on each device sequentially until license limitation is reached - the rest will be added as unlicensed.
License management
The license must be installed to use InfiMONITOR NEXT, it may be done at installation stage or in the "System configuration" section. Internet access must be provided to workstation used for license installation.
License management is performing in the licensing center.