...
Scenario 3 - connection with the "infinetwireless.com" from PC1 (source - 192.168.1.10, destination - 82.151.200.119)
- Step 1: PC1 generates a packet with the destination IP address 82.151.200.119 (the IP address of the server where the infinetwireless.com website is available). The packet is sent to router R1.
- Step 2: R1 router goes through the checks its routing table: there are no networks in the routing table that match with the destination IP address, so the default route should be used0.0.0.0/0 having the gateway 10.10.2.2 will be used (see the below routing table of R1). The router sends the packet to R2 its eth2 interface is the gateway.
- Step 3: R2 router goes through the checks its routing table: there are no entries matching with the destination IP address, so the default route is used and the packet is sent to a router outside the local network (inside the WAN network).
Center | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Figure 6c - The packet Packet transmission from PC1 to the infinetwireless.com server
|
Anchor | ||||
---|---|---|---|---|
|
...