| Include Page | ||||
|---|---|---|---|---|
|
| Hide_comments |
|---|
Cable Gland Assembly for RJ-45 connector
Required components are listed below.
...
Сборка кабельного ввода для разъема RJ45
Для сборки вам потребуются следующие компоненты:
- Стандартный разъем RJ-45 connector.Shielded
- Экранированный разъем RJ-45 connector.
- FTP Cat5e cableКабель FTP Cat5e.
- Cable glandКабельный ввод:
- Cable gland nut.
- Split sealing grommet (with inner diameter 7 mm).
- Cable gland threaded coupling.
- Гайка кабельного уплотнения.
- Втулка с резиновым уплотнением.
- Корпус разъема.
- Обжимные клещи для разъема RJ-45.
| Note | ||
|---|---|---|
| ||
The outside diameter value of the FTP Cat5e cable should not exceed 7 mmЗначение внешнего диаметра кабеля FTP Cat5e не должно превышать 7 мм. |
| Note | ||
|---|---|---|
| ||
Cable gland can be assembled on pre-crimped cable. |
Assemble procedure
| Anchor | ||||
|---|---|---|---|---|
|
In order to ensure that the device case remains sealed under any environmental conditions follow the assemble procedure:
...
- Step 2: Assemble cable gland nut, the split sealing grommet and the cable gland threaded coupling onto the pre-terminated cable as shown on the figure below.
- Step 3: Insert the split sealing grommet into the cable gland threaded coupling.
- Step 4: Insert the RJ-45 connector into the device socket until you hear a click.
- Step 5: Screw the cable gland threaded coupling into the port and tighten it. Do not apply excessive force.
- Step 6: Tighten the cable gland nut (4). Do not apply excessive force.
Cable Gland Assembly for Optical Cable
Required components are listed below.
- Optical cable.
- Optical connector.
- SFP module.
- Cable gland:
- Cable gland nut.
- Split sealing grommet (with inner diameter 3.2 mm).
- Cable gland threaded coupling.
Assemble procedure
- Step 1: Put the cable gland nut, the split sealing grommet and cable gland threaded coupling onto the pre-terminated optical cable as shown on the figure below.
- Step 2: Insert the split sealing grommet into the cable gland threaded coupling.
- Step 3: Set the SFP module into the socket until you hear a click.
- Step 4: Insert the optical connector into the SFP module.
- Step 5: Screw the cable gland threaded coupling into the port and tighten it.
- Step 6: Tighten the cable gland nut. Do not apply excessive force.
...