...
| Table of Contents | ||
|---|---|---|
|
Greenfield
The "Greenfield" mode allows to reduce the frame preamble during the transmission over a wireless connection, increasing the link performance by 10-15%.
Autobitrate and ATPC
To keep a balance between the wireless link's performance and the retries number, we recommend to always set the "Bitrate" parameter to "Auto" mode. Also enable the automatic transmit power control (ATPC) in order to increase the operational life of the devices.
...
Packet retries management
The "Turbo" and "SCS" modes are mode is available in the TDMA software version, which allow to increase the wireless link throughput in case that the degradation is caused by a large number of errors in the radio.
Detailed information about the radio parameter configuration via the web interface is available in the "Link Settings" article and in the "Link Pre-configuration in the lab" or Settings" article or via CLI in the articles: "mint command (TDMA version)" and "rfconfig command (TDMA version)".