| Include Page | ||||
|---|---|---|---|---|
|
| Hide_comments |
|---|
One of the most common solutions to separate data traffic from the BS to the CPEs and vice versa is to create VLAN filters within different switching groups. For the management traffic, we have to create a separate switching group and VLAN. In this case, the CPEs cannot communicate between them and they cannot access the management VLAN:
...
- Select Trunk mode for the Switch Group #1.
- Add a new rule for this switch group and select VLAN mode for it.
- Configure all VLANs that must be processed within this Switch Group #1: let's configure VLAN101, VLAN102 and VLAN103. Please note that PCAP expressions cannot be used in this case.
| Center | |||||
|---|---|---|---|---|---|
|
...
We have to assign an IP address to SVI interface ans and create VLAN interface:
- In the "Network Settings" section, assign an IP address to the automatically created SVI interface.
- Click the «Create VLAN» button , and set the management VLAN number.
- Set Ethernet interface as parent to VLAN and configure Vlan ID.
...