Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Figure - IDU-BS-G(60W)

Indoor Gigabit PoE Injector with lightning protection for InfiLINK XG.

ParameterDescription
Size151*62*38 mm (L*W*H)
Weight0.32 kg
Connectors and Interfaces
  • "ETH IN" - Ethernet input (Data only)
  • "ETH OUT" - Ethernet output (Data+VDC), PASSIVE PoE
  • "PWR" - AC Input
Supported Ethernet Modes
  • 10/100/1000Mbps (Gigabit Ethernet pass-through)
Input Voltage
  • 100 ... 240 V
Output Voltage & Current
  • +55 V, 1.1 A
Consumption
  • 60 W
Operating temperature range
  • -10 °С ... +40 °С
Ethernet Connectors Pin-out

ETH IN:

PinDescription
1Data pair A+
2Data pair A-
3Data pair B+
4Data pair C+
5Data pair C-
6Data pair B-
7Data pair D+
8Data pair D-

ETH OUT:

PinDescription
1Data pair A+
2Data pair A-
3Data pair B+
4+VDC + Data pair C+
5+VDC + Data pair C-
6Data pair B-
7-VDC + Data pair D+
8-VDC + Data pair D-
EMC

Meet:

  • FCC Class B
  • EN55022 Class B
Lightning Protection

In compliance with:

  • IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
  • IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
  • IEC 61000-4-5 (Lightning) L5, 95A (tp = 8/20us)
Table - IDU-BS-G(60W) Specification


Figure - IDU-BS-G(60W) Front Panel

 

 

 

Figure - IDU-BS-G(60W) Rear Panel
  • No labels