Skip to content
Skip to breadcrumbs
Skip to header menu
Skip to action menu
Skip to quick search

Skip to end of banner Go to start of banner

Mounting kit

Skip to end of metadata

Created by Dmitry Amirov , last modified by Olga Kosareva on Nov 01, 2018

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

The default mounting kit is MONT-KIT-85. It allows reliable and easy installation of the unit with two-axis adjustment.

Mount variants are:

Standard pole.
Wall.
Thick pipe (vertical/horizontal).

The mounting kit contains the following.

Mount kit

MONT-KIT-85 assembly scheme

Assembly scheme

Installation procedure

Attach the basement to the back of the device, using bolt M6x14, washer flat M6 and washer spring M6.
Tighten the bracket and the bracer to the pole, using bolt M8x80, washer flat M8 and washer spring M8.
Attach the lever between bracket and basement, using bolt M8x35, washer flat M8, washer spring M8, nut M8. Do not fasten the nuts.
Adjust the required tilt and fasten all nuts at the required position.

No labels