By default the dashboard is opened after login. The dashboard is intended to provide the main information about the wireless unit operation. A lot of characteristics are presented for uplink and downlink and per stream, so you may see the whole information about link operation on the same dashboard.
Information panel
The following information you may find at the top panel.
Figure - Information panel
- Unit and link summary:
- Unit role.
- Link status - there are the following statuses are available:
- On Master unit:
- Started - Master unit is waiting for Slave unit for link establishment.
- Connected - link established.
- On Slave unit:
- Sector detection - Slave unit is searching for Master unit for link establishment.
- Connected - link established.
- On Master unit:
- Link identificator.
- Calculated link distance.
- Link uptime.
- Current firmware version.
- Network interfaces:
- Radio:
- Current values of the basic radio parameters.
- Graphs for traffic statistics on the radio interface, where the current max capacity and current utilization level are presented.
- Wired interface:
- Graphs for traffic statistics on the wired interface.
- Radio:
Link metrics
The metrics of the wireless link are presented below the top panel.
Figure - Link metrics
- MCS.
- RSSI.
- CINR.
- ARQ.
- Frame loss.