The dashboard is opened after login by default. The dashboard is intended to provide the main information about the wireless unit operation. It contains characteristics for uplink and downlink traffic and per stream, so the whole information about link operation can be displayed on the same dashboard.
Information panel
The following information you may find at the top panel.
Figure - Information panel
- Unit and link summary:
- Unit role.
- Link status - there are the following statuses are available:
- On Master unit:
- Started - Master unit is waiting for Slave unit to establish the link.
- Connected - link established.
- On Slave unit:
- Sector detection - Slave unit is searching for Master unit for link establishment.
- Connected - link established.
- On Master unit:
- Link identificator.
- Calculated link distance.
- Link uptime.
- Current firmware version.
- Network interfaces:
- Radio:
- Current values of the basic radio parameters.
- Graphs for traffic statistics on the radio interface, where the current max capacity and current utilization level are displayed.
- Wired interface:
- Graphs for traffic statistics on the wired interface.
- Radio:
Link metrics
The wireless link metrics are shown below the top panel.
Figure - Link metrics
- MCS.
- RSSI.
- CINR.
- ARQ.
- Frame loss.