The default mounting kit is MONT-KIT-85. It allows reliable and easy installation of the unit with two-axis adjustment.
Mount variants are:
- Standard pole.
- Wall.
- Thick pipe (vertical/horizontal).
The mounting kit contains the following.
MONT-KIT-85 assembly scheme
MONT-KIT-85 Installation procedure
- Fix the basement to the back of the device using the four bolts M6x14, flat and spring washers M6.
- Tighten the bracket and the bracer to the pole using bolt M8x80, flat and spring washers M8.
- Attach the lever between bracket and basement using bolt M8x35, flat and spring washers M8, nut M8. Do not fasten the nuts.
- Adjust the required tilt and fasten all nuts at the required position.