Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Gliffy Macro Error

Cannot find a diagram with these parameters:

  • Name: IDU-CPE-G Copy


Diagrams with the same name were found on the following pages:

Figure - IDU-CPE-G

Indoor Gigabit PoE Injector with lightning protection for Quanta 5 product family.

ParameterDescription
Size110*40*30 mm (L*W*H)
Weight0,110 kg
Connectors and Interfaces
  • "ETH IN" - Ethernet input (Data only)
  • "ETH OUT" - Ethernet output (Data+VDC), PASSIVE PoE
  • "PWR" - AC Input
Supported Ethernet Modes
  • 10/100/1000Mbps
Input Power Requirements
  • AC Input Voltage: 100 ... 240 VAC
  • AC Input Current: 0.4A @ 100 VAC
  • AC Frequency: 50 to 60 Hz
Consumption
  • 15,4 W (Garanteed)
Operating temperature range
  • -10 °С ... +50 °С
Operating humidity
  • Maximum 95 %, Non-condensing
Storage temperature
  • -40 °С ... +85 °С
Storage humidity
  • Maximum 95 %, Non-condensing
Output Power Voltage
  • 48 VDC
Ethernet Connectors Pin-out
  • ETH IN:
    PinDescription
    1Data pair A+
    2Data pair A-
    3Data pair B+
    4Data pair C+
    5Data pair C-
    6Data pair B-
    7Data pair D+
    8Data pair D-
  • ETH OUT:

    PinDescription
    1Data pair A+
    2Data pair A-
    3Data pair B+
    4+VDC + Data pair C+
    5+VDC + Data pair C-
    6Data pair B-
    7-VDC + Data pair D+
    8-VDC + Data pair D-
Electromagnetic Emission & Immunity
  • FCC Part 15, Class B
  • EN 55022 Class B
  • EN 55024
  • VCCI
Regulatory Compliance
  • RoHS Compliant, WEEE Compliant, CE Energy Efficiency Level VI
Safety
  • UL/IEC/EN 60950-1
Table - IDU-BS-G(60W) Specification

Figure - IDU-CPE-G Front Panel

 

Figure - IDU-CPE-GRear Panel
  • No labels