Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

IDU-CPE-G(24W)_ENG

Figure - IDU-CPE-G(24W)

Indoor Gigabit PoE Injector with lightning protection IDU-CPE-G(24W).

ParameterDescription
Compatible modelsQuanta 5, Quanta 70, InfiLINK 2x2 LITE, InfiMAN 2x2 STE, AUX-ODU-SYNC
Size and weight97*53.5*33.5 mm (L*W*H), 0.133 kg
Connectors and Interfaces
  • "LAN" - Ethernet input (Data only)
  • "POE" - Ethernet output (Data+VDC), PASSIVE PoE
  • "PWR" - AC Input

Supported Ethernet Modes

  • 10/100/1000 Mbps
Standards
  • IEEE 802.3 10Base-T                                                                          
  • IEEE 802.3U 100Base-TX                                                                        
  • IEEE 802.3ab 1000Base-T                                                                 
  • IEEE 802.3af Power over Ethernet                                                   
  • IEEE 802.3at Power over Ethernet Plus 
Input Power Requirements
  • AC Input Voltage: 100 ... 240 VAC
  • AC Input Current: 0.75 A
  • AC Frequency: 50 to 60 Hz
Consumption
  • 28 W
Operating temperature range
  • -10 °С ... +40 °С
Operating humidity
  • Maximum 95 %, Non-condensing
Storage temperature
  • -40 °С ... +70 °С
Output Power Voltage
  • 36 ... 56 VDC / 0.01 ... 0.75 A Max.28 W; 24V1A, 48V0.5A
Ethernet Connectors Pin-outLANPin12345678
DescriptionA+A-B+C+C-B-D+D-
POEPin12345678
DescriptionA+A-B++VDC / C++VDC / C-B--VDC / D+-VDC / D+
Safety
  • UL cUL, CE, GS, CCC, FCC, S-MARK, PSE, C-tick, KC(48V0.5A) BIS(24V1A)
Table - IDU-CPE-G(24W) Specification
  • No labels