In this section, you can view and edit the basic system settings that are already created.
NOTE
Read the information in the section "Apply, Try and Preview buttons for the configuration" in order to find out the output of the «Apply», «Test» and «Preview» buttons for the new configuration performed.
Figure - System Settings default configuration
General System Parameter | Description |
---|---|
Device Name |
|
User Name |
|
Password and Confirm Password |
|
WEB Interface language |
|
HTTPS only |
|
Start SNTP |
|
Use GNSS time |
|
SNTP IP Address |
|
Time Zone |
|
Latitude |
|
Longitude |
|
Use GNSS Position |
|
Table - System Settings
Click the «Open Map» button to open the Google map:
Figure - Google Map
Type the location name in the "Address bar", click the «Find» button to search for it and then move to the exact location where the unit is installed. Double click in that position on the map and the Google pointer (see picture above) will be placed there. After clicking the «OK» button, “Latitude” and “Longitude” fields are automatically filled in with the GPS coordinates.