Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.
InfiLINK Evolution is a wireless point-to-point solution, InfiMAN Evolution is a wireless point-to-multipoint solution. Both families have an impressive maximal performance of up to 650 Mbps, a packet performance is up to 500 000 pps. It operates in 5 and 6 GHz frequency ranges: from 4900 to 6425 MHz and supports the channel width 20, 40, 80 MHz.
Base Stations can be used with:
- a dual polarization integrated antenna with an antenna gain 17 dBi and 21 dBi;
- an external antenna connected to two N-type ports using low-loss RF cables.
Subscriber terminals and PTP devices can be used with:
- a dual polarization integrated antenna with an antenna gain 18 dBi, 23 dBi, 25 dBi and 28 dBi;
- an external antenna connected to two N-type ports using low-loss RF cables.
and operates in LOS and non-LOS conditions. SC-FDE radio technology is used for data transmission.
Radio
Automatic Modulation Control (AMC) – modulation control algorithm selects the most appropriate modulation-coding scheme in order to maximize the link performance.
Automatic Repeat Request (ARQ) – a technology which enables packet re-transmission in case of previous unsuccessful delivery, allows to achieve reliable connectivity even in highly congested spectrum.
Automatic Transmit Power Control (ATPC) – a technology which allows to limit the overall power system mode, which takes into account the antenna gain and losses in the RF cable.
Automatic range detection - the guard interval optimal for the actual distance is automatically determined.
Networking
Ethernet‑over‑IP tunneling.
MAC/IP filtering.
RIPv2 / OSPFv2 /static routing.
Tunneling (Ethernet‑over‑IP, IP‑over‑IP).
L2/L3 Firewall.
NAT (multipool, H.323‑aware).
DHCP client/server/relay.
Stacked VLAN support (Q-in-Q) avoids the limitation in the number of available VLANs (4096), which can be useful for large networks. In addition, Q-in-Q allows you to organize L2 channels within a limited VLAN list, which is widely used in provider networks and on leased communication channels.
Quality of Service
- 17 priority queues.
- IEEE 802.1p support.
- IP TOS / DiffServ support.
- Full voice support.
- Traffic limiting (absolute, relative, mixed).
- Traffic redirection.
Environment
- Operating temperature range -40 ... +60 ºС.
- Dust and water protection in compliance with IP66/IP67.
- Wind load up to 160 kph - operation, 200 kph - survival.
Power
The device has following electrical parameters:
- Consumption is up to 30 W for base station sectors and up to 15 W for subscriber terminals.
- Power options: 90-240 VAC~ @ 50/60 Hz, ±43..56 VDC.
- 802.3at support or Infinet Wireless proprietary passive PoE.
- AC/DC injector:
- IDU-BS-G(60W) is included to the packing list of base station sectors.
- IDU-CPE-G(24W) is included to the packing list of subscriber terminals.