Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.
The "Extra Commands" section allows you to take advantage of the CLI configuration flexibility within the Web interface. While the Web interface is simple to use and understand, there are several parameters that can be configured via CLI only.
CAUTION
The commands that do not have the enhanced parameters displayed in Web interface are: sys, ifconfig, prf, qm, tun, route, mint, switch, svi, lag, sntp, dhcpc:
Parameter | Description |
---|---|
Command |
|
Parameters |
|
Disabled |
|
- "Up/Down" arrows allow you to organize the command list
- Click the «Remove Command» button if you want to delete the command from the list permanently
- Click the «Add command» button if you want to add the command to the list
For example: choose “sys” command from the dropdown menu, type “no indicator” in the parameter field and then click the «Apply» button; this command is saved into the configuration (and not only executed) and is applied (switch off the LEDs of the unit) after reboot.
In the "Command Line" menu, the commands are only executed, but not saved into the configuration, while in "Extra commands" section from "Basic Settings" menu, the commands are executed and saved into the configuration.