...
| Hide_comments |
|---|
| Table of Contents |
|---|
InfiMONITOR NEXT allows the network engineers to monitor the status of the wireless devices and to manage their configurations.
...
The list of devices is displayed in a table with the following columns:
- "Device" - the device name.
- "Status" - current device status.
- "Family" - family to which this device belongs.
- "IP address" - device's IP addresses list.
...
Clicking on a specific device, its card will be opened. This is a standard interface that includes detailed information about a network host:
- "Parameters" - device name and description, its location and the SNMP settings for polling.
- "Status" - the device's operational parameters.
- "Maintenance" - in this section, a network engineer can manage the device configuration, updating its software and groups.
- "About" - information about the model, serial number and the device's family. Here it will also be displayed the current status of the NEXT license.
...
The list of configurations includes the entire configuration history, displayed as a table with the following columns:
- "Version from" - configuration date and time:
- The date and time of its upload to the monitoring system.
- For the draft, the date and time of the last change.
- "Source" - configuration source, the following values are possible:
- EMS - configuration applied using NEXT.
- Device - configuration received from the device. Configuration changes were made directly on the device, the monitoring system has detected it and downloaded the updated configuration.
- "Status" - current configuration status, the following values are possible:
- Draft - draft configuration stored in NEXT and not applied to the device.
- Success - the configuration was successfully downloaded from the device or applied to it.
- Error - the applying of the configuration on the device has failed.
...