...
- The manual - each wireless device should be added to the monitoring system manually
- The automatic - it is sufficient to add at least one or several devices, depending on a network structure afterwards InfiMONITOR will automatically add all the rest connected devices.
Automatic devices search
InfiMONITOR performs automatic search via the MINT technology (see Description and working principles of InfiMONITOR). By default, the automatic search function is enabled, to check it, proceed to the section "Settings" -> "Discovering".
...
In order to disable the automatic devices search and addition function, click the "Disable Auto-Discovering" button. It possible to re-enable at any time.
Adding
...
devices
In order to add the devices go to the section "Settings" -> "Devices". Here is the list of all devices added earlier with the following parameters:
- Host name
- IP address
- Serial Device serial number
Include Page _InfiMONITOR Device Status Description _InfiMONITOR Device Status Description
Center | |||||
---|---|---|---|---|---|
|
In order to add devices click the "Add Devicehost" button, the window with the following fields will appear:
...
Center | |||||
---|---|---|---|---|---|
|
Сlick the "Create" button аfter filling all the fields.
Adding device procedure
The device would not be added instantly, only after its polling. The procedure to add the device consist from the following steps:
...
To see the pending devices click the "Pending deviceshosts" button
Center | |||||
---|---|---|---|---|---|
|
Note | ||
---|---|---|
| ||
If the device is pending for a long time, it can indicate the authentication credentials are incorrectl and/or the SNMP server has not been started on the device. Check the settings and correct them if necessary. |
Adding
...
links
Anchor | ||||
---|---|---|---|---|
|
InfiMONITOR automatically defines wireless links between the devices therefore there is no need for their manual addition.