InfiMONITOR polles devices via the SNMP protocol. Therefore each device in the network should have SNMP agent running and configured to perform the devices management and monitoring.Hide_comments
How to add new device to monitoring network
By default, "SNMP Agent" and "SNMP Trap" are disabled.
...
- Via the CLI command line interface (this option is faster)
- Via the WANFleX web-interface.
Via the CLI
Access the device via the Telnet or SSH protocols and execute the following commands (replace USERNAME and PASSWORD with the desired values):
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
trapd agent IP ADDRESS config save |
Via the web-interface
| Note | ||
|---|---|---|
| ||
You can use the Web-interface "Command Line" section for running the commands mentioned above. |
...