| Center |
|---|
| Scroll Title |
|---|
| title | Figure - IDU-LA-G(V.01) top view |
|---|
|  Image Removed
|
|
IDU-LA-G(V.01) is an indoor DC/DC injector. It greatly reduces complexity of the deployment in the cases where DC source is available thus reducing both capital expenditures and total cost of ownership.
...
- To serve as a line protection unit for indoor network equipment connected to the second Ethernet port on ODU.
- To connect third-party DC power sources to ODU (for example, to power the unit from solar power or wind power sources).
In both cases IDU-LA-G(V.01) should be properly grounded (please refer to the “Grounding and Lightning Protection” section of this manual).Technical parameters
| Center |
|---|
| scroll-title |
| title | Figure - IDU-LA-G front panel view |
|---|
|
 Image Removed
|
| Center |
|---|
| Scroll Title |
|---|
| title | Figure - IDU-LA-G(V.01) inside view |
|---|
|  Image Removed
|
|
Size 115×65×40 mm (L×W×H), weight 0.15kg
| Center |
|---|
| Scroll Title |
|---|
| title | Figure - Mounting holes sizes |
|---|
|  Image Removed |
|
Input voltage supported for InfiNet Wireless models and devices.
| Center |
|---|
| Scroll Title |
|---|
|
| title | Table - Input voltage |
|---|
|
| Input voltage, VDC | Model |
|---|
+9…+56 | R5000-Smn | R5000-Lmn | R5000-Smnb | R5000-Smnc | R5000-Lmnc | | ±43…±56 | R5000-Mmx | R5000-Omx | R5000-Mmxb | R5000-Omxb | R5000-Qmxb | Um | Xm | AUX-ODU-SYNC |
| Description |
|---|
| Compatible models | InfiLINK XG, InfiLINK XG 1000, InfiLINK 2x2, InfiMAN 2x2, Quanta 5, Quanta 6, Quanta 70, InfiLINK Evolution, InfiMAN Evolution |
|---|
| Output Voltage | The same as input |
|---|
| Supported Ethernet Modes | 10/100/1000 Mbps (Gigabit Ethernet pass-through) |
|---|
| Pin assignment and polarity | 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) |
|---|
| DC Range | Acceptable input DC range depends on the specific ODU model:
• InfiLINK XG, InfiLINK XG 1000, InfiLINK 2x2 PRO, InfiMAN 2x2 BS, Quanta 70, Quanta 5, Quanta 6, InfiLINK Evolution, InfiMAN Evolution models: ±43... ±56 VDC
• InfiLINK 2x2 Lite, InfiMAN 2x2 STE models: +9... +56 VDC (positive voltage only) |
|---|
| Size and Weight | 115×65×40 mm, 0.15 kg |
|---|
| Operating temperature range | from 0°С to +40°С |
|---|
| Warning |
|---|
|
Exposing unit to the unsupported voltage will result in irreparable damage to the unit! Always observe power requirements! |
Connectors description
...
Mounting holes sizes
| Gliffy Diagram |
|---|
| size | 550 |
|---|
| name | IDU-LA-G(V.01)_mounting holes |
|---|
| pagePin | 1 |
|---|
|
IDU-LA-G(V.01) Packing List
...
...
...
Image Removed
...
- Connector and cable assembly
- Connector: DC plug, on cable, 2,1х5,5х9 mm
- Сable length: 1,5 ... 1,6 m
...
Image Removed
...
...
Image Removed
...
Cable assembly
| Gliffy Diagram |
|---|
| name | Cable Inf-cable-001 |
|---|
| pagePin | 1 |
|---|
|