Wireless device
An integrated wireless device contains The wireless device contains both the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment this equipment can be used to create point-to-point wireless links at distances in excess of 5 20 km (depending on weather conditions, interference, terrain, climate zones, etc.). The following lens-type integrated antenna with an antenna gain 39 dBi is available.wireless device is supplied in the following configuration:
- Lens antenna with 39 dBi gain.
- Cassegrain antenna with 50 dBi gain.
Lens antenna
Center |
---|
Gliffy Diagram |
---|
displayName | Q70_equipment |
---|
name | Q70_покраскаequipment |
---|
pagePin | 4 |
---|
|
|
Cassegrain antenna
Center |
---|
Gliffy Diagram |
---|
| |
---|
name | Q70-50 Hardware |
---|
pagePin | 1 |
---|
|
|
Grounding bolt
For grounding the ODU wireless device to the supporting structure.
Interfaces
Quanta 70 has network combo port: gigabit Ethernet and SFP.
Wired interfaces
...
Only one port can be used for data transmission at a time.
Note |
---|
|
Please note, the SFP port has priority in case both ports are enabled. |
Center |
---|
Interface | Description |
---|
Gigabit Ethernet | RJ45 socket for connecting to power supply and |
---|
|
...
data transmission. The network connection to the |
|
...
wireless device is made via a 1000BaseT (Gigabit) Ethernet connection. Power is provided to the |
|
...
device over the 1000BaseT Ethernet connection |
|
...
using a standard IEEE 802.3at passive PoE power supply. | SFP |
---|
|
...
| External optical Gigabit port for plugging of the optical SFP transceiver module. |
---|
|
RSSI value indication in dBm.
Power, wired and wireless statuses indication
...
LEDs
Note |
---|
|
Power and wired statuses indication is performed via glassy plug of the cable gland. |
...
|
centerPortsConditionIndicationGE0SFP Power On (initialization)RX Signal value | Values on the RSSI LED are displayed in negative (-) dBm. For example, 90 represents a received signal level of -90 dBm. Lower values indicate stronger received signal levels. | — — | Wireless link is not established | Gigabit Ethernet SFP | Flash | Initialization | The LEDs on both ports light up with white on second. Then LEDs check is performed: red, blue, green are lightened up sequentially. |
---|
Power On (loading) | At | Flash | Loading | Only for Gigabit Ethernet port: at the beginning green is lightened a few seconds, on the second loading stage switches to blue. |
ERP stage | Port (GE0 or SFP) with | ON/Blue | Power | Only for Gigabit Ethernet port. | ON/Red | Speed 10 Mbps | Only for Gigabit Ethernet port. | ON/Yellow | Speed 100 Mbps | Only for Gigabit Ethernet port. | ON/Green | Speed 1000 Mbps |
| ON/Green | ERConsole stage | Port with the established link lights up with green, the second port remains blue. |
|
...
Center |
---|
Gliffy Diagram |
---|
namedisplayName | Ethernet Indication |
---|
| gliffy | name | SFP Ethernet Indication |
---|
|
|
...
Part number description
Quanta 70 part number has the following structure
...
Structure items are described below
Center |
---|
|
Item | Description |
---|
1 | Product family name: |
---|
2 | Frequency range: |
---|
3 | 39 - antenna gain, dBi.
...
Lightning protection unit
...
Part number description
Include Page |
---|
| _Quanta 70 Numbering convention |
---|
| _Quanta 70 Numbering convention |
---|
|