Interface type | Operations |
---|
ethX | - Configure the IP address(es) and the mask of the interface
- The IP address(es) of the "ethX" interface is accessible via Ethernet LAN segment only (it won't be accessible via the "rfX" interface from other neighbor unit)
- The IP address(es) of the "ethX" interface is used in the routing process
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
- Set the interface mode (for example: 1000Base-TX-fullduplex) - the :
- The default value is “Auto” (recommended)
- Optical SFP modules may not work properly in auto-negotiation mode with some devices. In case of troubles with data transmission via the SFP port, it is recommended to set a fixed speed and duplex mode (for example, 1000BaseTX-fullduplex-manual).
- Make sure the same duplex mode is set on both devices.
|
rfX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
|
sviX | - SVI interface is a logical L3 interface of the switch (solely used for the management of the unit)
- Configure the IP address(es) and the mask of the interface (as the management IP address(es) of the unit)
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically (as the management IP address(es) of the unit)
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the Switch group number which this interface is assigned to (bind the SVI interface to a switch group)
|
prfX | - PRF interface makes the Ethernet interface that it is assigned to, to appear as a regular RF interface in terms of the MINT network (for more information please refer to the WANFleX OS User Manual)
- Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be transmitted the encapsulated packets (assign the PRF interface to the physical Ethernet interface)
- Set the channel number (from 0 to 3) on which the frames are sent and received by the parent interface
- Both PRF interfaces (of the two units in the link) must have the same channel assigned in order to establish the wireless link
|
vlanX | - Configure the IP address(es) and the mask of the interface in case you use this interface for the management of the unit, only (not recommended way)
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be transmitted the encapsulated packets
- Configure the VLAN tag (or VLAN ID) for the current interface (from 1 to 4094)
- In the drop-down window, you can select the vlan interface operation mode:
- 802.1q - vlan tag operations are performed according to this standard;
- 802.1ad - double tagging "QinQ";
- 802.1ah - backbone bridge using mac-in-mac technology described by the IEEE 802.1ah-2008 standard.
|
lagX | - Link aggregation interface is a logical interface used to combine multiple physical channels into one logical channel in order to increase link capacity and redundancy (for the units with two physical Ethernet ports)
- Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be aggregated the encapsulated packets
- Enable/disable Fast Mode
|
tunX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the tunneling mode: IPIP or GRE
|
tapX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
|