...
| Center | |||||||
|---|---|---|---|---|---|---|---|
|
General options in this section:
...
| Warning | ||
|---|---|---|
| ||
Disabling the switch in the absence of routing settings can lead to termination of packet transmitting through the device. |
- "Disable STP Forwarding" - prevents STP frames forwarding in the switch mode when STP support is disabled.
- "STP MINT mode" - enables/disables the STP MINT mode. STP MINT mode is used to exclude the wired switches with the enabled STP protocol influence on the network operation. The mode blocks the BPDU frames of the STP protocol configured on wired switches so that the switch cannot detect the loop and block its ports. STP MINT mode in conjunction with the RSTP protocol enabled in the Infinet devices allows to break the loop and support the PRF protocol functioning that operates through the wired segment.
- «Remove L3 Management» - by clicking this button you can delete the "sviX" interface interface, which is available in the default configuration, for the unit management.
- «Create L3 Management» - by clicking this button you can add an "sviX" interface for the unit management via Web interface.
...