In this page, you can view and edit the basic system settings.
NOTE
Read the information at the section Apply and Try buttons for the configuration in order to find out the output of the «Apply», «Try» and buttons for the new configuration performed.
Figure - General page
The general page is divided in the following sections:
- Access Credentials and Web GUI
General System Parameter | Description |
---|---|
Device Name |
|
User Name |
|
User Password and Confirm Password |
|
Guest User Name |
|
WEB Interface language |
|
Keep current system password |
|
HTTPS only |
Table - Access credentials and Web GUI
- SNTP and Time Zone
- GNSS and Location
General System Parameter | Description |
---|---|
GNSS Antenna Power |
|
GNSS Monitoring |
|
Latitude |
|
Longitude |
|
Table - GNSS and Location
Click on the «Open Map» button to open the Google map:
Figure - Google Map
Type the location name in the Address bar, click on the «Find» button to search for it and then move to the exact location where the unit is installed. Double click in that position on the map and the Google pointer (see picture above) will be placed there. After clicking on the «Ok» button, “Latitude” and “Longitude” fields are automatically filled in with the GPS coordinates.